Vacuum bonding machine
Basic specifications
- Size: W300 x L450 x T (total height) 150 (mm)
- Laminated product: glass + film, film + film, glass + glass
- Laminated shape: Flat + Flat, 2.5D + 2.5D, 3D + 3D, etc.
- Position accuracy: ± 0.05mm (alignment mark or outer shape alignment)
- Pressurization setting range: 0.05 to 0.5 MPa
- Chamber vacuum: 50 Pa or less
Vacuum laminating machine
With camera alignment, it is possible to laminate with high accuracy of ± 0.05 mm between alignment marks.
For alignment, you can use specially formed marks, print openings, film and panel outlines, panel active areas, and other areas that can be seen with the camera.
The laminating objects can be used not only for rigid bodies such as glass panels and cover glasses, but also for attaching films to glass and attaching films to each other.
Since the total height of the laminating object and the laminated object is up to 150 mm, it can be laminated on complicated shapes.
As for the shape, it can be used not only for planes but also for 2.5D and 3D shapes. When attaching to a three-dimensional object or curved surface shape, it is necessary to confirm whether the device can be supported on a case-by-case basis, so it is necessary to confirm whether it can be supported each time.